証券コード PGBO
RRP ProGuard Bolt-On Mudguard
- First direct mount mudguard of its kind
- No zip ties or velcro straps
- Neatest looking large mudguard on the market
- Easily removed in seconds
- Height adjustability by 6mm
- Angle adjustability for better fit if needed via 2 tilt brackets
- 2 thick rubber pads to protect your forks
- Sticker recess for easy fit and sticker protection
- RRP special proven polypropylene mix is used for maximum durability and fit
- Long front to cope with high speed mud and spray
- Small turn down at front to deflect spray and for better tyre clearance
- Long rear with raised flick offers more protection especially when the wheel is turned
- Proven seal shield to increase fork protection and extend service intervals
- Not suitable for 2022 Fox Forks
Designed to fit the following forks:
- Fox 32, 34, 36, 49 - Std or Boost (Won't fit 40 in 26" or 27.5" without additional bracket)
- Marzocchi: Fox chassis versions only
- Ohlins: All models
- SR Suntour: All models
BenFitted to a 2022 Fox 36 Factory using the specific spacer, it took me about 5 minutes to do a perfect job. I've got the mini for year round muck and it keeps plenty of crap out of my face and off the bike. Well made, looks great works well
Mr MansfieldReally well made secure mudguard, fits my fox 36’s perfectly, not cheap but worth paying the extra for
Mr KazemiThis fits perfectly on Fox 38 Forks using the screws on the back of the Fork. Very easy to fit using only 2 bolt screws on the back and the pads on the side fit snug. Looks great and works great at keep mud and rockstrikes down.
Mr WhiteVery tidy, fits great
Mr EstanislaoPerfect fit for my Ohlins RXF36. Received the item as per description.
Mr JobsonEasy to fit, looks neat - excellent price and service from Merlin.
Mr CamachoNice one, clean and easy install, great product
Prince WilhelmUsed for both bikes and it works best, good fit and purpose.
DomThe product is great and offers good protection from spray from the front wheel. The mudguard mounted really easily on my Fox fork with the mounting bolts provided. The adjustment shims meant I was able to get a good adjustment with no wheel rub. The mounting is very stable and can recommend as a great product.
Mr HollisGreat mud guard, top quality, bolt of feature works well and looks much better than zip ties.
Lord MatthewShipping to the US costs almost as much as the mudguard itself, but I don't regret it. Excellent design and build quality. Fits great on my 34 and works really well. This is the one to get.
Steve 'M'£32 is a lot for a bit of plastic and a couple of bolts. But when you ride with it in really muddy, wet conditions it's worth every penny. Bolted directly onto my Fox Performance fork via the mounting plate and two small bolts. Easy peasy. Secure, works brilliantly at protecting you from all the splatters with enough clearance on a 2.4 Maxxis High roller for any potential blockages. In 3 months time you will forget how much you paid, but every time you ride in wet conditions you'll appreciate how much it's worth.
Gee Morganso I had a MudHugger before but once I saw this on a friend's bike I needed it on mine. I love it and works brilliantly. Love it!
GlennBrilliant outstanding mudgauard
Mr BrownOutstanding product , gives great cover from mud and water and is also really easy to install with all fixing's and tools supplied.
Mr SilveyExcellent product, very easy to fit and doesn't look out of place on the bike.
ANExcellent product so much better than cable ties.
Mr BarndenFirst ride with this was a filthy snowy, muddy winter ride in the Peak District. The guard stayed in place well, no slop or rattle. While my face wasn't completely clear it did a good job and the seal guards work well. It looks good and I love not having cable ties on the forks, an unexpected benefit is the ability to clean mud and dirt from the inside of the fork legs (where there would normally be cable ties). The guard sits against the fork with sprung rubber pads which can be pushed inwards to stop mud build up and fork abrasion.
Dave RobertsHere's to "no mud in your eyes". This guard achieves what my previous Mudhugger couldn't. Slight mess up in spec from me my Fox Factory forks don't have mount holes. Tie wraps on the fork bridge do a perfect mount job though with no shifting. Only slight disappointment is that the guard is slightly out of true with a slight twist as unpackaged.
Darren rides bikeExpensive (best price with Merlin) but super tidy integrated looks when bolted on. Good fit on Fox 36 with 2.6 wtb tyre and Fox 34, also with 2.6 wtb tyre. Bit fiddly to fit but the shims supplied tune the angle well. Expensive option to just ditch zip ties, have opted for the Zefal FM30 for Rockshox forks, but the ProGuard mini looks undeniably slick and will probably stay on the bike year round
MatthewFantastic fit. No more zip ties scuffing my forks!
AdamGreat mudguard and so nice to not have to faff around with cable ties and velcro. Clearance is quite tight and I thought my fork bridge was threaded - it wasn't! (Must use my readers more). Sr suntour sleeve packs (essential for non threaded) are hard to get hold of (stock issues?) but sorted it with a similar sleeve bolt from a well know flat pack furniture company.
BenUsed the non-bolt on version of this in the past, and this was no let down either. Great quality and perfect for keeping mud and water out of your eyes in the wet!
Mr HynesExcellent design and fitment , simple and easy to fit with many sturdy and well thought out attachment variations , also adjustable
DobbyFits well (Ohlins forks) and not put adjusters on yet as doesn't catch front or back. Not ridden through really muddy stuff yet to know how well it works but looks like it will work.
PaulBolt onto a Fox 36 with no issues. Great fit and looks fantastic
Az AliOK, only 4 stars at the moment. Is a very good rearguard and works well to keep most of the mud off you. Having a few issues with a bit of chaffing against my wheel here and there due to the DW-Link suspension on my Ibis Ripmo. Otherwise a good product from RRP. , looks great on the bike and doesn't look out of place.
NedVery good, had all the bolts and everything it needed, seemed to work well in the mud
MarkNever liked mudguards but now I have an EMTB which takes the sting out of riding through thick mud. After a few rides ending up with my bike and I caked in mud I decided I need e a mudguard. This fit perfectly and solidly onto my Fox forks. A very effective way to keep mud off your face/front of body.
MattThis is just the job. I picked it as it bolts on so be need for cable ties that could damage the forks. Fits great and looks good (as good as mudguards can anyway!)
Mr NelsonGreat job. Not much reaches the goggles when riding in a bog!
Mr goundryVery good product, easy fitting to Fox 36 forks and kept the muck off me and bike
Mr SinclairPerfect fit for my Fox forks. Great service from merlin. First tiime of using them and definitely would again.
ZoltánSzNice look and feel, quality is excellent as well.
Mr MarshallGreat guard with all the fittings included. Easy to fit and forget. Great investment
Mr AnderssonSupergood quality, looks amazing
Mr GlenGreat item,already had the mini version but needed the bigger standard for winter mud,service was perfect and quick delivery
Mr CornerVery easy to fit with the optional bolts for different forks. Only used once to date but worked well.
Adam ColesGreat quality and a real step up from the cheaper alternatives. It provides good coverage and was easy to fit.
Mr DalyFits very easy to Fox forks. Plenty of adjustment so ample tyre clearance, even running Magic Marys. Sturdy, no vibrations or rattles once fitted. A very good mudguard.
CraigPerfect solution, been looking for a bolt on fork for years after finally moving to a Fox fork I can now have one. Stays in place perfectly and stops all the dirt going in my eyes!
Mr YTIzzoI love the sturdiness and ease of use of this product. Shipping was fast and cost was good. Very sturdy piece of equipment.
FrazerVery tight fit on Fox 36 Factory fork with 29er boost wheel and 2.6" tyre. Nice neat fitting with bolt on version though. Not ridden in mud yet but have concern over clearance in thick gloop, but will give benefit of doubt for time being.
WilBy far the best mud guard I've run. It fits on the new 2021 Fox forks too, with much more coverage than the official one.
R GardinerReally easy to fit, looks neat and works great - even comes with wedges to get the angle of it set up just right with the right amount of tyre clearance either side. Comes with a couple of nice Allen keys too which is always useful, and some 3M sticky pads to protect the mudguard from rubbing on your fork lowers. It’s also nice and sturdy so it won’t bend out of shape in the car if you take your front wheel off, and if you flick up a big rock it won’t crack or break easily like other mudguards can. Glad I bought it, I can tell it’s going to help a lot this winter!
matthewGreat fitting, seems to be very substantial and secure with good coverage. Will be having another for the other bike
Mr HughesThe Mudguard Fitted the Suntour fork mount on my Carrera Vulcan ebike perfectly and works well at keeping the mud off the battery unit
Mr McAleerSuper mudguard, very study and easy to fit.
Mr CLARKFantastic mudguard, arguably the best out there. Great friendly service at Merlin cycles, highly recommend to anyone
Mr WilliamsClean look and well built hard plastic
Mr awcockeasy installation, good looking and does what it says
Mr BarrettGreat looking guard, works very well and is much cleaner lookin bolt on
JamesWant to stop mud, water or whatever being flicked up in your face? Buy an RRP mudguard
Mr Chong Fook SingVery quality product, a piece of item must have!
chrisGreat fit with shims to adjust angle to suit. Matched up to Fox 34 perfectly. Very clean lines as no straps around fork legs.
Mr keenFitted to fox 36 using the bolts provided. So far it rock solid and stop mud flicking up. Great product and Merlin service as always!
Mr LeightonRRP Pro Guard is simply the best on the market, a super clean look and not a zip tie in sight, simply bolt it onto the rear of your fork brace and give your bike an instant facelift, it's super sturdy without having the cheap plastic look and if you fancy a little colour then order the optional colour stickers for the centre channel to match your ride.
JasonPurchased for my NCM Moscow, fits perfectly into the SR Suntour forks. One thing to note is that the screws supplied did not fit the thread in my forks so I had to find a slightly larger screw from my toolbox.
peterFab mudguard at great price with bolt on fitment so your forks don’t suffer with cable tie rub highly recommend
WilliamDelivery was prompt and well packaged. Very pleased with the premium quality of the product and easy to install with the additional SR Suntour sleeve pack making this a perfect fit for my sons new Specialized Riprock 20 front wheel.
AdamBSolid mudguard - the smaller size is big enough for any weather really. Much cleaner than the zip tie ones, easy to put on, solid and very good tyre coverage. Great product!
Mr OsborneBest mudguard I have ever had, installation is so straight forward and looks pukka vs. The usual cable tied attempts
Mr EvangelistaBrilliant bit of kit , purpose bullt sturdy robust and good quality and super easy to fit, comes with all the necessary attachment with no need for zip ties looks smart and give plenty of clearance over the wheel with a sleek look to it so it doesn't look out of place .very well recomend, just wish they produced something similar for the rear
Mr O'KeefeGood design and well made but as its a single mounting screw for suntour forks it does slip down and rub on the tyre now and then. Overall quite pleased and still better than velcro guards
MikaPerfect, exactly what I was looking for. Protect my battery from splashes and keep my eye clear of mud. Prompt delivery and well packaged. Thanks
JamesWell designed and neat looking mudgurd plus no cable ties :-) Does a good job at keep small stones etc from flicking up, would probably need the next size up for muddy conditions
EdwardThis product was very well packaged and delivery was prompt it is very good quality and easy to install. The amount of spray that it catches from the front wheel is very impressive considering the mudguards length.
Mr BowkerFits to my Ohlins fork really nicely. Not much clearance but very effective. No more mud in my face!
Mr CanningExcellent quality, really easy to attach.
Mr Schustervery fine mudguard, fits perfectly to the shox. Very strong
Filipe GilI had a Proguard (long) of the zip tie version. It does a fantastic job. However as soon as these bolt-on versions came out I had to try one. went for the short version and boy, I'm not disappointed. The way this thing bolts on makes it look great, seamless on the bike whilst performing as well as if not better than before. Class act!
steveGreat product,. easy to install, I recommend cleaning out the threads prior to initial install. A major step forward from zip ties.
JimzLove the fender. Kit came with everything you need including really nice Hex Keys. Spacers to raise or lower the front, and the hardware for all applicable bike models. It's tough and looks great. Keeps my fork stanchions and seals clean.
StayHighGreat bit of kit that not only provides excellent protection against mud and spray etc but also doesn't damage your paint work with zip ties and velcro etc. Simple and easy to fit with only a couple of bolts this is a well made item that just works.
Lord TeixeiraBest ever. No Mud on Goggles.
ThomasPerfect fit, on my Fox Float, small and very good protection . Somewhat high price but worth the expense.
JustinGreat service and great product. Quick and easy to fit. A very effective mudguard.
SpookGood solid product - easy to fit
Mr SmithI had fabricated a bolt on mudguard for my Fox forks a few years ago so it was a no brainer to buy this . Key benefits are that it’s simple to fit and provides plenty of space for tyres (2.35 on 29er fork). I purchased the mid size guard which offers enough protection from mud flying up into your face without spoiling the look of the bike. The mudguard is well thought out with bolts for all relevant figments and two shims to make sure it fits with even gaps front and back. In summary it’s a great addition to stop the usual mud spray and simply to fit.
JulianGood strong practical short mudguard. Easy fit and no cable ties required.
FergI bought this for my new bike as I couldn't find an Enduroguard in the right colour, so pleased I did! It is expensive in comparison, but offers protection way above expectations, wish I'd bought one ages ago for my other bike!! Easily the best mod for winter in the Scottish slop!
JoshuaBought the short version from Merlin as the price was the best around. I have the long version fitted for winter riding, the short one will go on in spring! Amazing piece of kit I can highly recommend this, no more zip ties TF.... Don’t bother with anything else this is the be all and end all in bolt on mudguards.
JordanStoked that a mudguard has finally been made to fit my Ohlins forks which have barely any clearance. Top job RRP. Looks neat too!
