Magicshine ME 1000 E-Bike Headlight

NOT SUPPLIED WITH A BATTERY OR CABLE (SEE BELOW) AND MUST BE CONNECTED TO YOUR E-BIKE

Specialized cables required which is not included in the retail packaging which can be purchased from us by clicking here.

To connect this light to the drive motor, you may require the E-Bike function enabling on your motor. In order to do this, you may have to visit your local E-Bike Motor (Shimano, Bosch, Yamaha or Brose, Dealer). 

ME 1000 is a 1000 lumen bike headlight designed specifically for e-bike cyclists perfect for commuting.

The quality and functionality of the bike lighting system are equally important during the day as in the night. When the night settles in, a bike light’s obvious purpose would be to illuminate the path ahead, alerting the cyclists of all incoming obstacles. With natural lighting abound, a bike light’s main responsibility during the day is to provide the cyclist adequate passive be-seen visibility among and the fast moving, ironclad motorists. The cyclist’s road presence is vitally important with modern day E-Bikes moving much more quickly and silently than traditional bicycles.

Features

• ME 1000, the first E-Bike specific bike light of MAGICSHINE, powered via battery/motor system, allowing you to do away with the traditional onboard battery system.
• After years of research and development, ME 1000’s front lens has been fine tuned to make the most of its extremely power efficient LED, the two are perfectly matched to provide a maximum output of 1000 lumens, carpeting the entire frontal section with no sharp edge nor hot spots. Beam reach and spread has been adjusted to optimize the rider’s reaction time to incoming obstacles at moderate speeds.
• During daytime, the always on Daytime Running Light significantly enhances the rider’s road presence at very little power consumption, when entering a tunnel or shortly after sundown, light’s output automatically switches to full power mode with its ambient light detection.
• In an effort to maximize the versatile purposes of the ME 1000, Magicshine have added side lighting and anti-glare to fully round out ME 1000’s active and passive safety features under all weather and road conditions.
• The adjustable light head of the ME 1000 provides a wide arc of lighting area (up to 45°, down to 90°). Vertical light is diffused past eye level, reducing its blinding effect for oncoming traffic, side lighting allows better visibility for traffic alongside the rider. Durable and seamless one-piece aluminium alloy housing is fully integrated with its one prong aluminium mount, which can be installed on either side of the stem on the handlebar without removing a grip, shifters or brake levers, providing unprecedented stability, though only compatible with 31.8mm and 35mm handlebars.
• Heat control is streamlined with its internal smart thermal protection circuit and dissipation properties of the shell material, max output levels can be maintained throughout your ride with internal components well protected from overheating. Seamless design also allows IPX6 waterproof rating.
• Various output specifications provided by most manufacturers are of no issue as long as the voltage is within the 6 -12 V range, the ME 1000 automatically detects the system output and adapts to available power (6v/12v Bosch, Shimano, Brose, Yamaha).

Specification

• 1000 lumens max verified output from 1x Luminus SST-40 LED
• 140m max beam distance, 4900CD beam intensity.
• 100/50/30% brightness modes, 30% flash mode, and standalone DRL mode.
• Automatically adapts to system output(6-12V)
• Support motor output levels: 7/9/12W
• Support for Bosch, Brose, Shimano, and Yamaha  (Motor Cable Required)
• The light head weighs 92g
• Durable aluminium alloy out-front mount for handlebars 31.8mm and 35mm