Rohloff Disc Speedhub 500/14 CC E14 OEM 2 135mm Quick Release 32H Hub With Axle Plate
UVP
Code: 117385
Rohloff Disc Speedhub 500/14 CC E14 OEM 2 135mm Quick Release 32H Hub With Axle Plate
The Rohloff Speedhub makes cycling simple. No longer is it necessary to constantly calculate which gear is required next or if the gear has correctly engaged yet. Simply rotate the Rohloff twist-shifter regardless whether stationary of pedalling. Rotate up to shift up, down to shift down. It couldn’t be more intuitive.
Extremely Low Maintenance
Experience a bicycle transmission, that requires just a bare minimum of maintenance. One oil change per annum or 5000km that’s all that is needed. Aside from this oil change, you need only keep an eye on the primary transmission wear. Childs-play when compared to the multi-sprocket transmissions of lesser bicycle transmissions with their delicate linkage derailleurs.
Rohloff E-14 Shifting
Rohloff E-14 shifting system raises the bar for shifting E-bikes transmissions. Never before has shifting been so easy, intelligent and comfortable. All this combined with legendary Rohloff quality.
The E-14 from Rohloff synchronizes perfectly with the mid-motor, Bosch / Panasonic FIT1 eBike system to operate the now legendary Rohloff Speedhub 500/14. Urban, leisure, touring and mountain-bikers alike can reap the benefit of the unique, fast and failure-free shifter system.
One push of a button is all it takes to automatically reduce motor derived force upon the transmission and shift the Speedhub. If the button is kept held, then the E-14 shifting system will shift 3-gears at a time in sequence, through all 14 gears if so desired. In addition, once the sensors note the cyclist has become stationary, the E-14 system will automatically shift to a pre-programmed gear to start off again. The Rohloff E-14 is the most efficient and durable shifting system available for mid-motor E-bikes.
Features
- CC OEM axle plate according axle type on for frame with Rohloff OEM dropouts. Axleplate according axle type. For frames with international standard (IS1999) disc brake mounts.
- 526% range of gears (equivalent to typical 27Speed MTB derailleur system)
- 14 Individual gears (no wasted overlaps or duplicates)
- Evenly spaced 13.6% gear increments. (no sudden big jumps)
- Ability to shift whilst stationary or under load.
- Super efficient sealed Oil bath mechanism (95-99%)
- Adjustment and maintenance free over thousands of miles.
- Gear positions are indexed inside hub, thus negating critical cable tension adjustments.
- Precision German engineered (in use Worldwide in the hardest of races and regions.)
- Super reliable, can be used for virtually all disciplines, including Tandem and Downhill.
- Lightweight - approx 1.7Kg, but replaces a lot of conventional gear components...
Specification
- Axle: 135mm Quick Release With Axle Plate for vertical dropouts and I.S disc brakes
- Disc Mount: 4 Hole Rohloff fitment
- Sprocket: Not Included
- Speed: 14
- Spoke Holes: 32H
Please Note: This is hub only as pictured
